Getting to Know Hair Cutting Tools

If you want to style hair professionally, then you got to have the right attitude and tools. The process of learning the different cuts shall come easy as you open your mind, eyes and ears. However, the chances of having a professionally done haircut will not be feasible if you do have the hair cutting tools that you can use for this task. If you do not have any idea on what you can use, check out the list of items below that you can use for professional cutting: including hair straightener brush, hair dryer, hair cutter etc.

  1. Scissors- Your shears are very important in cutting hair.  The smoothness of cutting relies on how you hold these tools effectively. For the professionals, the level of comfort is high that they can cut layers in a breeze. The kind of texture that this professional hair cutting scissors can bring relies on how sharp they are. It can also affect the time for you to finish the work. Some have different positioning of handles to ensure less difficulty in moving around their hands while cutting.
  2. Thinning shears- If you have a hairstyle and you think that it still looks bulky, you can snip your hair with this device. It works the same as the scissors used for cutting only this time, if you cut a segment of your hair, it will not remove everything. Some hair will fall off but it will not be shortened. If you have coarse hair, you can thin it to make it finer. This hair styling scissors is very useful in layered haircuts or shaggy looks.
  3. Razors- This tool is just like any razor that men use to shave their beards or mustache. This is another tool used to lessen the bulk of the hair. It gives a shredded look to your haircut. If you want to remove more bulk on the tips of the hair this is the perfect device to use. They are also commonly used in cutting the hair of men. When it you cut it short or if they specify a certain measurement on the haircut, this hair cut tool can be very reliable. It also removes unwanted hair on the nape and near the ears.
  4. Comb (hair brush)- A comb is your guide in cutting hair. It effectively creates a division, to allow you to cut the segments of the hair evenly. Usually professionals run it through your hair to measure it and see if they failed to cut a certain portion causing uneven lengths. The comb can also remove hair that was not totally cut. It allows unwanted hair to fall off.
  5. Blower (hair dryer)- You will definitely need to use this after cutting a wet hair. This brings out the texture and the volume of the hair that you cut. The hairstyle becomes visible after you dry the hair. After drying, you will be able to evaluate whether the hair that you cut is evenly done or not. use high speed hair dryer will dry your hair fast, so high speed hair dryer will be better that normal hair blow dryer.

This is a start for you and once you have acquired all the basic tools then you are ready for your first cut. Try to invest on durable scissors for cutting hair and never settle for cheap metals.

Plastic Food Storage Containers

Best Plastic: Plastic Food Storage Containers

On the off chance that you convey your lunch to work, you may incline toward plastic compartments since they’re lighter and won’t break whenever dropped. This quality set has eight square holders going in size from 3 to 47 ounces. The plastic is without BPA and can be placed in the microwave, cooler, and dishwasher. The hooks are impenetrable and sealed so you can store nourishment and fluid inside without stress. The holders additionally home inside each other when not being used, making them simpler to store.

Buyers who have acquired Plastic Food Storage Containers have been for the most part content with it. Many have raved about the nature of the seal. A couple of clients have been unsatisfied with the holder’s presentation in the microwave—some revealed seeing scratches on it subsequent to warming nourishment—and others felt that the littlest size compartments were too little to ever be valuable.

plastic food storage containers
plastic food storage containers

Best for Lunches: Rubbermaid Lunchbox Sandwich Kit

Carrying lunch to class or work can be a sound and cost-sparing decision. It’s likewise critical to put resources into compartments that are anything but difficult to pack and ship. This set is an extraordinary decision for your lunch pack since it’s sturdy and the covers seal totally to forestall spilling. The particular structure enables the various compartments to snap together to spare space—in addition, you can likewise snap a cooler pack to it to keep your lunch cool. The unit incorporates the accompanying pieces: two nibble holders, one side compartment, one sandwich holder, and one blue ice pack. These compartments are additionally sans bpa and safe to use in the microwave, cooler, and dishwasher.

Numerous online analysts applauded these compartments’ strengths and how even children had the option to open and close the covers effectively. A few analysts have whined about spillage and that the compartments show nourishment recolors on a couple of events, yet the larger part would prescribe them.

Best Bento Box: Easy Lunchboxes 3-Compartment Bento Lunch Box Containerscustom plastic food storage containers

Pressing lunch for work or school can be an agony; however, these flawless bento lunch box holders keep nourishments independent so they won’t get wet. They likewise keep you from shuffling heaps of holders.

This set has simple to-evacuate tops that are additionally sealed and extraordinary for pressing in a children’s knapsack. Additionally, they’re BPA and sans PVC so they are free of destructive synthetic concoctions. The splendidly shaded covers in the arrangement of four make it simple to organize who gets what in families with numerous children. Additionally, having some good times compartments gives you a lot more thoughts for dinner arranging. Notwithstanding, some online analysts noticed that in spite of the fact that the case itself didn’t spill, fluids in some cases spilled between compartments.

Silicone injection molding

HI-TECH RUBBER, Inc., a leading silicone injection molding company for medical device and commercial applications has launched the Premier Collaboration Assistance Program (PCAP). The program combines the latest innovations, technology, and expertise from globally recognized material manufacturers, engineering institutions, and HI-TECH RUBBER Technology Team.

liquid silicone injection molding
liquid silicone injection molding

The goals of PCAP include:

  • enhance awareness and demand for elastomers and TPE’s as ideal materials suitable for medical device and commercial applications,
  • reduce possible inefficiencies experienced by the medical design process by channeling product design and production through improved processing methods, TPE injection molding
  • capture significant value for the customer through increased speed-to-market and lower development costs,
  • offer the ease and convenience of a single supplier for a wide variety of molding processes and materials,
  • reduce the expense and risk of research and development, and
  • enhance communication links among the company’s customers, suppliers, design consultants, cross-fertilization among disciplines, and exposure to outside ideas.

According to Dave Mabie, Senior Project & Marketing Manager, HI-TECH RUBBER, Inc., “A significant consideration when choosing to outsource is accelerated time to market and minimizing risk. The fact that most manufacturers’ supply base is highly fragmented makes it difficult for designers and manufacturers’ to coordinate new product development activities. PCAP focuses on the demand for up-to-date information on material, process and production innovations available to these concerns.”

HI-TECH RUBBER customers will access the program through the company’s 1-800 toll-free customer service line,  go to The Website portal provides customers a direct access to participating-collaborators and HI-TECH RUBBER’s Tech Team. Program information will include but is not limited to material and process selection, design assistance and engineering support, and terminology.

HAM Issues New Catalogue of Precision Milling Tools

With the introduction of a new 2010/2011 catalogue for milling tools in solid carbide and diamond, the manufacturer HAM Hartmetallwerkzeugfabrik Andreas Maier GmbH offers customers two options: standard solid-carbide and diamond milling tools and a preferred range of special high-performance tools in solid carbide.

The catalogue entitled “Precision Milling Tools in Solid Carbide and Diamond” presents the complete HAM range of standard milling tools. End mills, roughing end mills, toric end mills, ball-nose end mills, special end mills and diamond end mills are described in separate sections so that customers can find the products desired in a short time. The dimensions, features, cutting material, tool type, number of teeth, norm, shank design, spiral angle and application range of each end mill are outlined according to a popular system of pictograms.

An additional catalogue, “Special Campaign in Solid Carbide and Diamond,” represents a second HAM specialty. It includes a selection of solid-carbide end mills engineered for various demanding metal-working applications. This special campaign began at AMB 2010 and remains valid for nine months, concluding June 30, 2011. It encompasses a preferred tool range of solid-carbide end mills, solid-carbide roughing end mills, solid-carbide toric end mills, solid-carbide ball-nose end mills and solid-carbide special end mills.

Both catalogues are free upon request.

Aluminium high pressure die casting

Aluminum High pressure die casting is a manufacturing process in which molten metal (aluminum) is injected with a die casting machine under force using considerable pressure into a steel mold or die to form products. Because of the excellent dimensional accuracy and the smooth surfaces, most high pressure die castings require no machining except the removal of flash around the edge and possible drilling and tapping holes. High pressure die casting production is fast and inexpensive relative to other casting processes.

die casting china
die casting china

There are many types of aluminum alloys, GC mold is a Die Casting China Company uses for high pressure die casting parts with different mechanical properties and chemical breakdowns. Aluminum is used in 80-90% of the high pressure die casting alloys available in the world today. In many cases aluminum high pressure die casting can replace steel, increasing strength and reducing part weight. We produce high pressure die casting parts in small sizes of less than an ounce up to large sizes of 10 pounds. We usually can produce and ship high pressure die casting parts within two weeks of receipt of your purchase order if we have the high pressure die casting die already and have completed our first article inspections. In this process, the liquid metal is injected at high speed and high pressure into a metal mould. A schematic view of high pressure die casting is given in Figure 5. Figure 5: Schematic view of high pressure die casting

There are several aluminum alloys Kinetic Die Casting Company uses for high pressure die casting parts with different mechanical properties and chemical breakdowns. Aluminum is used in 80-90% of the high pressure die casting alloys available in the world today. In many cases aluminum high pressure die casting can replace steel, increasing strength and reducing part weight. We produce high pressure die casting parts in small sizes of less than an ounce up to large sizes of 10 pounds. We usually can produce and ship high pressure die casting parts within two weeks of receipt of your purchase order if we have the high pressure die casting die already and have completed our first article inspections. In this process, the liquid metal is injected at high speed and high pressure into a metal mould. A schematic view of high pressure die casting is given in Figure 5.

Figure 5: Schematic view of high pressure die casting machine This equipment consists of two vertical platens on which bolsters are located which hold the die halves. One platen is fixed and the other can move so that the die can be opened and closed. A measured amount of metal is poured into the shot sleeve and then introduced into the mould cavity using a hydraulically-driven piston. Once the metal has solidified, the die is opened and the casting removed. In this process, special precautions must be taken to avoid too many gas inclusions which cause blistering during subsequent heat-treatment or welding of the casting product. Both the machine and its dies are very expensive, and for this reason, pressure die casting is economical only for high-volume production. From the earliest application of die casting in manufacturing, the process has evolved from the original method of low-pressure injection into the development of high pressure die castings. The methods employed for creating high pressure die castings result in components that come out of the die in close to finished condition, with superior finishes and shape.

While high pressure die castings can be slightly more expensive, because of the excellent results and elimination of the need for secondary machining, high pressure die casting can be an economical choice for high volume production applications. The experts at Cascade Die Casting Group are ready to assist you in developing a customized approach to your component needs. We have the equipment, know how, and capability to apply the benefits of the high pressure die castings process to the parts you need for your application.

Die Casting Technology

There are three main forms of mold failure

1 thermal fatigue crack damage failure

Thermal fatigue cracking failure of die casting production, mold repeatedly stimulated cooling and heating effect, the molding surface and internal deformation are involved, and the repeated cycles of thermal stress, leading to tissue structure of two injuries and loss of toughness, causing cracks appeared, and continue to expand, once a crack expanding, and molten metal liquid impact, coupled with repeated mechanical stress crack accelerated expansion. Therefore, on one hand, die casting mold must be fully preheated starting. In addition, in the production of the die casting die in must be kept in a certain temperature range, so as to avoid the early cracking. At the same time, to ensure the mold production and manufacturing of internal no problem. Because of the practical production, the majority of the ineffectiveness of the die thermal fatigue cracking.

2 invalidity

Fracture failure of the shot under the action of force, die in the weak point of crack, especially the molding surface scribing traces or electric machining marks are not polished optically, or molded clear corner will appear first fine crack, when the grain boundary exists brittle phase or coarse grains, which is easy to break. And brittle fracture crack growth quickly, the mould invalidity is very dangerous factors. Therefore, on one hand where mold surface scratches, electric machining marks must be polished light, Zinc Die Casting even when it is in the gating system position, must also be polished. Additional requirements by use of the mold material of high strength, good plasticity, impact toughness and fracture toughness were good.

3 corrosion failure

Molten failure previously said, conventional die casting alloy zinc alloy, aluminum alloy, magnesium alloy and copper alloy, but also pure aluminum die-casting, Zn, Al, Mg is the more active metal elements, they and the die materials has the good affinity, especially Al easy to bite mold. When the mold hardness is high, then the corrosion resistance is better, and the molding surface if the soft point, then on the corrosion resistance of adverse.

The die failure of many factors, both external factors (for example, whether the mold casting temperature preheating, water paint spraying quantity, die casting machine, die size matching tonnage, high-pressure gate speed too fast, cooling water open and die-casting production synchronization, casting materials and components, the discretion of Fe the casting dimension shape, size, wall thickness of coating type, etc. ). There are internal ( cases of mold material metallurgical quality, blank forging process, the mold structure and the rationality of the design of gating system, the rationality of the design, mold machine ( EDM ) generated during the processing of internal stress, the mold heat treatment technology, including a variety of matching precision and smoothness requirements ). Die if the early failure, need to find out what the internal or external, for future improvement. But in actual production, corrosion is only die locally, cases of gate directly flushing part ( core, cavity) prone to corrosion phenomenon, and the hardness is easy to appear soft aluminum die casting alloys adhesive die.

AMBA Finds Optimism in US Mould Industry

Results of the American Mold Builders Association (AMBA) Summer 2005 business forecast show continuing optimism in the US mould making trade as business remains steady. Of the 124 survey respondents, 21% reported that current business is excellent (compared with 14% in the Summer 2004 forecast), 49% reported business to be good, and 26% said business is fair. Only 4% found business to be poor, and no one said it was bad.

Three-month projections solicited by the AMBA survey were roughly the same as last year: a large plurality of respondents (46%) expect their company’s business to remain the same, while 36% expect to do moderately better over the short term. Only 6% of companies participating in the survey projected any three-month decline in business.

Twenty-seven percent reported that quoting was up compared with three months before, 50% said quoting was the same, and 23% reported that quoting was down. Shipments were up for 41% of the respondents and the same for another 45%.

The forecast notes that profits are up for 27% of the respondents (compared with 21% a year ago) and about the same for 57%. Though profits were down for 17% of the respondents, that was a better report than the 21% who said in the Summer 2004 forecast that profits had declined.

Employment figures also are holding steady; 34% of the companies responding to the AMBA survey reported employment up and only 7% down, with the rest unchanged. Survey participants have an average of 22 shop employees and 4 design and engineering employees. The former work 46 hours per week, while the latter put in 48 hours.

AMBA is the largest industry trade association in the United States for mould manufacturers and affiliated companies, serving 325 member companies in chapters throughout the country.

GTMA Organizes Funded Trade Visit to China

The Gauge and Tool Makers Association (GTMA) is organizing a trade mission to Beijing, China, for which it has secured funding of £750 from UK Trade & Investment for each eligible company participating. Firms that are not GTMA members are welcome to join the mission, which takes place October 15–22, 2005.

The trade mission coincides with the 2nd International Die & Mould Conference in Beijing. Participants in the GTMA delegation are invited to join the itinerary arranged by the China Mould and Die Association, which includes visits to mould making and plastics companies. Alternatively, they may make their own arrangements.

The GTMA is the UK’s leading trade association representing toolmaking, metrology, precision machining, rapid product development, and tooling technologies. In addition to sponsoring trade missions, the association develops engineering standards, technology seminars, and training initiatives, and collects UK and global market intelligence on relevant industry topics. It is a founding member of the International Special Tooling & Machining Association and the European Length Measurement Association.

Missler Announces Launch of 2006 Version of TopSolid’CAM

At EMO, Missler Softwareannounced that it will launch the 2006 version of TopSolid’Cam in the last quarter of 2005. This new version will include important improvements for production machining, especially for the mold making and aeronautical domains.

TopSolid’Cam is an integrated CAM software for the manufacturing of machined parts. Based on the automatic recognition of topological properties, TopSolid’Cam identifies individual shapes and can thus suggest the best machining method to use. Machine simulation, collision checks, management of the stock, spindle synchronization, raw part updating and visualization of material removal are important elements of TopSolid’Cam for tool path programming.

Key improvements in TopSolid’Cam 2006:

  • The automatic transformation of 3-axis tool paths into 5-axis tool paths.
  • This function, a significant improvement for mold makers, permits the use of shorter tools to machine the part, which in turn favors good cutting conditions, a decrease in possible vibrations, and a significant reduction in cycle times.
  • TopSolid’Cam 2006 automates the emptying of 5-axis pockets, which in turn considerably reduces the number of steps necessary to perform this action. The new version of TopSolid’Cam automatically evacuates the holes followed by a pocket wall finishing using the swarf machining technique.
  • Drilling on wire-frame geometry, allowing the machining of identical holes not modelled in the CAD file which have different orientations. In addition, this function enables faster 5-axis drilling.
  • TopSolid’Cam 2006 gives the operator the possibility to manage production by “assembling” several different parts and their machining processes on the same machine. In other words, the operator can assemble parts already programmed without needing to reprogramme the parts. In case of a machine breakdown, for example, the operator can change machines without reprogramming the parts.
  • TopSolid’Cam 2006 offers turning cycles adapted to Swiss turn lathes. In fact, all turning cycles such as roughing, finishing and breakdown have been adapted to the Swiss turning process.
  • Tool length management by separating 3D machining processes, an improvement that lets mold makers make surface and cutting condition improvements. This function automatically divides the machining operations in such a way that they are carried out by both a short and long tool. Thus, cutting conditions are optimised and cycle times are reduced.
  • TopSolid’Cam 2006 manages ¾ gun drills used for deep drilling. This new function offers special cycles for ¾ gun drills, which are mainly used by mold makers in the drilling of cooling circuits in mold plates.

Missler Software is one of the leading global suppliers of CAD, CAM and ERP solutions. The company’s product lines include TopSolid, TopManufacturing, and Goélan. Missler offers a uniquely integrated solution for the mechanical engineering industry (general mechanical design, special machinery, tooling, and boilerwork) and for the sheet metal and wood industries.

Big Metalworking Trade Fair Set for Southeastern China in October 2006

The seventh edition of the metalworking industry’s leading trade fair for southeastern China, Metal Working China 2006 (MWC), will offer suppliers from around the world a dynamic international market showcase when it is held in Shanghai October 10–13, 2006. MWC focuses on machine tools, sheet metal–working machines, wire-working machines, pipe-machining equipment, metal-forming machines, precision tools, and tool and mould making.

MWC is the only trade fair in the southeastern Chinese economic zone to cover the whole spectrum of metalworking and related processing. Many world-famous companies have used the fair as a platform for growth. A record 500 exhibitors are anticipated in 2006 (compared with 377 in 2004), filling around 35,000 m² of floor space. Some 50,000 visitors attended in 2004.

National pavilions for Europe, Germany, Switzerland, the Czech Republic, Italy, Spain, France, South Korea, the USA, China, and Taiwan will offer smaller companies access to the promising Chinese market. China, the world’s sixth economy and third-leading trading nation, is now the largest market for machine tools.

Leading industry associations on the consumer side are supporting MWC, including the China Automotive Industry Association, China Aviation Industry Corp., and China National Machinery & Equipment Corp. Major national machine tool associations taking part include the German Machine Tool Builders’ Association (VDW), the Association of Spanish Machine Tool Factories (AFM), the Swiss Mechanical and Electrical Engineering Industries (Swissmem), and the Korea Machine Tool Manufacturers’ Association (KOMMA).

MWC is organized by Hannover Messe International GmbH, Hannover Fairs China Ltd., Shanghai, and China National Machine Tool Corp. The venue for this exhibition, as well as for four simultaneous trade fairs whose topics tie into the capital goods focus of MWC, is the state-of-the-art Shanghai New International Expo Centre in Pudong, which was inaugurated in 2001 as a pioneering joint venue for the Hannover, Düsseldorf, and München trade fair companies and their Chinese partners.

A supporting programme highlighting key developments and market trends in the sector while addressing practical issues will feature the Metal Working Summit, company presentations, forums, and plant visits.

“Nowadays, no export-oriented machine tool producer can afford not to be a player on the Chinese market,” commented Wolfgang Lenarz, CEO of Hannover Messe International GmbH.